Small Sheet Size (8 ½” x 5 ½” + ½” tab extension) Vinyl Binders – Screen printed, offset printed, or other decoration directly onto vinyl.

Round Ring Metals

3-Piece Pictorial Inserts – Offset or digitally printed sheets completely entrapped underneath clear vinyl.

For offset or digitally printed sheets wrapped or turned around chip board.

For standard sheet size poly binders screen printed, offset or digital printing and other decoration directly on poly.

Are you planning to provide printed cover sheets for us to make casemade wrapped binders, 3-piece pictorial binders, or clear overlay binders? Check the information below.

Casemade Wrapped Binder Specifications (Available in PDF format)
Pictorial or Clear Overlay Binder Specifications (Available in PDF format)
IMPORTANT: Customer must supply wraps trimmed to the Binders.com (VIP/ATC) template size. For trim sizes contact your sales representative at 1-800-633-4526.

NOTE: If order amount is in between quantity categories, choose the next highest category. Example: 350 piece order, add 88 pieces.

• Paper: 80# minimum, 100# preferred—C1S Label
• Gloss Lamination: .5 mil glueable/stampable polyester (1.2 mil with adhesive)
• Matte Lamination: .5 mil glueable/stampable polypropylene (1.2 mil with adhesive)

Miscellaneous:

Press sheets cannot have aqueous primer or coating prior to lamination. This will cause the lamination to detach from the binder leaving air bubbles.

Lamination is applied to paper in a way that cancels out paper curling. Prints should be printed grain long (see diagram below). Lamination must bleed past our cut lines to allow for excess trim on all four sides.

Sheets must arrive flat with no curling. Each stack must not exceed 30” tall. Sheets cannot cling together due to lamination, paper, static, etc. Sheets stacked over 30” create blocking/clinging due to weight factor. Each sheet is fed into automated equipment. Clinging causes multiple sheets to be inserted into the equipment, spoiling those sheets.

NOTE: If order amount is in between quantity categories, go to next higher category. Example: 350 piece order, add 88 sets.

• Paper: 80# offset enamel preferred or equivalent
• Paper must be coated
• Customer to supply prints trimmed to Binder.com (VIP/ATC)’s template size for front, spine, and back cover. For trim sizes, contact your sales representative
• Prints must be clearly marked to show which print goes on front and back covers
• Binders.com (VIP/ATC) will not be held responsible for prints that are not trimmed to correct size
• Binders.com (VIP/ATC) will not be held responsible for print quality issues including color matching, positioning of graphics, image quality, appearance of prints in binder, etc.